| ITEM | TORQUE SPECIFICATION (Foot-pounds / Newton-meters) |
|---|---|
| Spark plugs | 11-17 (132-204 in-lbs) |
| Engine oil drain plug (19mm) | 22-30/31-41 |
| Gearbox drain plug (24mm) | 29-43/39-59 |
| Gearbox fill plug (square) | 18-29/25-39 |
| Differential drain plug (24mm) | 29-40/39-54 |
| Differential fill plug (23mm) | 29-40/39-54 |
| Wheel lug nuts | 66-86/89-117 |
| ITEM | TORQUE SPECIFICATION (Foot-pounds / Newton-meters) | ||
|---|---|---|---|
|
13-20/18-26 14-21/20-28 |
||
| Swaybar end link bolts, both ends | 27-40/36-54 | ||
| Axel lock nut | 123-159/167-216 | ||
| Wheel lug nuts | 66-86/89-117 | ||
| ABS wheel speed sensor | 15-18/19-25 | ||
| Upper shock mount plate bolts | 22-27/29-36 | ||
| Upper shock nuts | 23-34/31-46 | ||
| Lower shock bolt | 54-69/73-93 | ||
| Lower control arm bolt, front | 54-69/73-93 | ||
| Spindle (vertical) bolt | 54-69/73-93 | ||
|
69-83/94-112 54-70/73-95 |
| ITEM | TORQUE SPECIFICATION (Foot-pounds / Newton-meters) | ||
|---|---|---|---|
| Front/rear bracket bolts | 36-51/49-69 | ||
|
58-65/78-88 25-29/34-39 |
||
| Front/rear banjo bolts | 16-22/22-29 | ||
| Rear adjuster plug bolt | 9-12/12-16 |
| ITEM | TORQUE SPECIFICATION (Foot-pounds / Newton-meters) |
|---|---|
| Crank pulley main bolt (1990 - early 1991) | 80-87/108-118 (plus Loctite 242-blue) |
| Crank pulley main bolt (late 1991 - present) | 116-122/157-165 (plus Loctite 242-blue) |
| Crank pulley bolts - 4 | 109 - 151 in-lbs |
| Cam cover bolts | 43-78 in-lbs |
| Alternator mounting bolt | 27-38/37-52 |
| Alternator tension adjustment bolt | 14-19/19-25 |
| Water pump - 4 bolts to block | 14-19/19-25 |
| Water pump pulley - 3 bolts | 69-151 in-lbs |
| Water inlet pipe - 2 bolts to water pump | 14-19/19-25 |
| Radiator - upper bolts | 14-19/19-25 |
| Thermostat cover - 2 bolts | 14-19/19-25 |
| Timing belt tensioner bolt & idler pulley bolt | 28-38/38-52 |
| Timing belt cover bolts | 69-95 in-lbs |
| Cylinder head bolts (must be done in stages and in correct order.) | 56-60/76-81 |
| Fuel Rail | 14-19/19-25 |
| ITEM | TORQUE SPECIFICATION (Foot-pounds / Newton-meters) |
|---|---|
| Airflow meter bolts | 69-95 in-lbs |
| Intake manifold bracket | 27-40/36-54 |
| O2 sensor | by feel, as close to 22-36 ft-lbs as possible |
| Exhaust pipe clamp bolt (to bell housing) | 15-20/21-27 |
| Bell housing bolts | 48-65/65-88 |
| Exhaust header nuts | 28-34/38-46 |
| Cat converter nuts (both ends) | 30-41/40-55 |
| ITEM | TORQUE SPECIFICATION (Foot-pounds / Newton-meters) |
|---|---|
| Transmission front cover bolts | 14-18/19-24 |
| Flywheel bolts | 71-75/96-102 |
| Pressure plate bolts | 14-19/19-25 |
| Bell housing bolts | 48-65/65-88 |
| Prop shaft nuts | 20-22/27-30 |
| Power plant frame bolts | 77-91/104-123 |
| Starter motor bolts | 28-38/38-51 |
| Starter motor mounting bracket bolts | 28-38/38-51 |
| Slave cylinder fluid tube | 9-16 (113-190 in. lbs.) |
| Slave cylinder mounting bolts | 12-16/16-22 |